LinuxCNC 2.6 on Ubuntu 10.04

Before starting you will need:

8GB (or larger) FAT32 formatted USB drive
Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/ubuntu-10.04-linuxcnc3-i386.iso
Download Universal USB Installer: http://www.probotix.com/linuxcnc/Universal-USB-Installer-1.9.6.0.exe

-- OR --

Download Rufus: https://rufus.akeo.ie/

Create the Bootable USB Drive

Note: The following directions are to be done on an Internet connected Windows computer.

Using Universal USB Installer

Open Universal USB Installer and agree to the terms.
Under "Step 1", scroll all the way down to the end of the list and choose "Try Unlisted Linux ISO".
Under "Step 2", click the Browse button then browse to and select the LinuxCNC iso file you previously downloaded.
Under "Step 3", choose the USB thumb drive.
If the USB drive was previously used (not new), put a check mark in "Format Drive".
Click the "Create" button.
A confirmation screen will pop up details the steps the Universal USB Installer is going to make. Click "Yes".
The software will extract and begin writing the iso file to the USB stick.
After a few minutes, the process will complete. Click "Close".
Now you have bootable USB thumb drive with LinuxCNC on it.

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9

Using Rufus

Open Rufus and agree to terms.
Verify Rufus identified the correct USB drive to be used under the Device label.
Click the Select button to browse and select the LinuxCNC iso file you previously downloaded.
Click the Start button to begin the installation.
Say Yes to the first warning to allow the update.
Say Ok to the warning about the drive being reformatted.
When Rufus has finished the installation you will see the final picture.

Step 2
Step 3 & 4
Step 5
Step 6
Loading
Ready

Reinstall Ubuntu

Note: The following directions are to be ran on the machine control computer.

Insert your previously created bootable USB thumb drive into the LinuxCNC PC and turn the power on. Once on begin tapping the F2, F9, DEL or whatever button applies to your PC until the boot menu appears. From the boot menu, choose to boot from the USB drive. Select the Install Ubuntu option and next you should see something similar to the following options in the installation menu.

Choose the English language
Choose your time zone
Choose the USA keyboard layout
Choose Erase and use the entire disk
Enter the following:
- Name: probotix
- Username: probotix
- Password: probotix
- Computer name: probotix-desktop
- Choose Log in automatically
There is no step 6
Click Install
The installer will then reformat the drive and install the OS.
When installation is complete click Restart Now
When prompted, remove the USB drive and hit ENTER