PROBOTIX :: wiki PROBOTIX :: wiki

Note: Requires 64 Bit Processor.

Before starting you will need:

• 8GB (or larger) FAT32 formatted USB drive
• Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/PROBOTIX-LinuxCNC_2.9.2.iso
• Download Win32DiskImager: http://www.probotix.com/linuxcnc/win32diskimager-1.0.0-install.exe

Create the Bootable USB Drive

Burn Image To USB Thumb Drive

1. step 1
2. step 2

Install Operating System

Note: Make sure your BIOS clock is set properly before starting the re-install. It may also be a good idea to replace the BIOS battery before setting the clock.

Boot From USB Thumb Drive to Install Custom Debian 12

1. Insert USB Thumb Drive and boot from it. You may need to select the boot source. This varies by motherboard, but can include hitting <F12> or <F2> or <F10> to select boot media.

• 

  Step 1: Start Installer

• 

  Step 2; Wait For Installer To Finish

1. When the installer has finished it will reboot in the Debian 12 operating system.

Clone PROBOTIX Linux CNC Repository

1. /home/probotix/clone_linuxcnc.sh

• 

  Step 1

• 

  Step 2

• 

  Step 3

• 

  Step 4

• 

  Step 5

• 

  Step 6

• 

  Step 7

• 

  Step 8

• 

  Step 9

Update OS

1. /home/probotix/linuxcnc/setup/os_setup.sh

Update AXIS

1. /home/probotix/linuxcnc/update_axis.sh

Edit Configuration

Edit ini File

1. /home/probotix/linuxcnc/configs/PROBOTIX/[machine_model].ini

LinuxCNC First Launch

Launch Configuration Chooser

1. Applications > Accessories > LinuxCNC
2. Choose Machine Version