PROBOTIX :: wiki PROBOTIX :: wiki

Note: Requires 64 Bit Processor.

Before starting you will need:

• 8GB (or larger) FAT32 formatted USB drive
• Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/PROBOTIX-LinuxCNC_2.9.2.iso
• Download Win32DiskImager: http://www.probotix.com/linuxcnc/win32diskimager-1.0.0-install.exe

Create the Bootable USB Drive

Burn Image To USB Thumb Drive

1. step 1
2. step 2

Install Operating System

Note: Make sure your BIOS clock is set properly before starting the re-install. It may also be a good idea to replace the BIOS battery before setting the clock.

Boot From USB Thumb Drive to Install Custom Debian 12

1. step 1
2. step 2

Clone PROBOTIX Linux CNC Repository

1. /home/probotix/clone_linuxcnc.sh

Update OS

1. /home/probotix/linuxcnc/setup/os_setup.sh

Update AXIS

1. /home/probotix/linuxcnc/update_axis.sh

Edit Configuration

Edit ini File

1. /home/probotix/linuxcnc/configs/PROBOTIX/[machine_model].ini

LinuxCNC First Launch

Launch Configuration Chooser

1. Applications > Accessories > LinuxCNC
2. Choose Machine Version