Actions

Vacuum Pump/Table

From PROBOTIX :: wiki

Revision as of 10:56, 11 December 2014 by Admin (Talk | contribs) (Created page with "Vacuum pumps are relatively expensive.We typically buy a dust boot and connect a shop vac on our machines. For an economical choice, here is a good dust boot: http://www.kent...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Vacuum pumps are relatively expensive.We typically buy a dust boot and connect a shop vac on our machines.

For an economical choice, here is a good dust boot: http://www.kentcnc.net/nc/products/94-standard-dust-shoe.aspx

Here is a good reference on CNC Zone on this topic: http://www.cnczone.com/forums/diy-cnc-router-table-machines/3302-vacuum-table-vacuum-pump.html

This guy has some great videos here is one to make your own vacuum table: https://www.youtube.com/watch?v=fOrkvPF0pro

Retrieved from "https://www.probotix.com/wiki/index.php?title=Vacuum_Pump/Table&oldid=12461"