Actions

Table

From PROBOTIX :: wiki

Revision as of 13:11, 5 September 2014 by Admin (Talk | contribs)

Here is a simple, inexpensive, yet effective way to build a table to support, your Comet, Meteor, or Asteroid

Table 1.jpg


Start by cutting two 45's on the 4x4 legs. Then drill holes and pound 5/16 tee nuts into them. Then carriage bolts allow you to level the table. 1x4's complete the frame and MDF provides a nice smooth surface to support the machine.

Table 2.jpg


Here you can see the detail of the feet.

Table 3.jpg

Here is a shot of my test rig.. You can sometimes find monitor arms on eBay like the one I am using.

Table 4.jpg

Retrieved from "https://www.probotix.com/wiki/index.php?title=Table&oldid=12355"