Legacy Machine LinuxCNC Configuration
From PROBOTIX :: wiki
Configuration Files
You will need to unzip the file onto your desktop of the machine computer. You will then go to "Places" => "Home Folder" => "LinuxCNC" => "Configs" Once you are in the configs folder you will place the folder contained in the zip file into the configs folder.
Then you will go to "Application" => "CNC" => "LinuxCNC" => then select the configuration you want to use. In the lower left of the configuration selection window, you have the option to create a desktop short cut. This is recommended for easy access to the program.
- TS in the file name is only for machines with a Tool Sensor
- 4A in the file name is only for machines with a 4th/Rotary Axis
- Standard (imperial) units are default unless configuration specifies Metric
- 2015 in the file name are for machines built after 2015 OR machines retrofitted with Bipolar drivers and wiring
- If you do not know what configuration to use, contact PROBOTIX
Comet
Meteor
Uni polar, no Tool Sensor: File:Meteor.zip
Bi polar, no Tool Sensor: File:Meteor 2015.zip
Uni Polar, no Tool Sensor, 4th Axis: File:Meteor 4th Axis.zip
Uni polar, no Tool Sensor, Metric: File:Meteor (metric).zip
Bi polar, no Tool Sensor, 4th Axis, Metric: File:Meteor 4A Metric 2015.zip
Uni polar, Tool Sensor, 4th Axis, Metric: File:Meteor4thTSMetric.zip
Uni polar, Tool Sensor: File:MeteorTS.zip
Asteroid
Uni polar, Tool Sensor: File:AsteroidTS.zip
Nebula
(former Meteor XL) Uni polar, Tool Sensor: File:MeteorXL TS.zip
V90
This file will need to be adjusted to match the performance of your machine.
X90
This file will need to be adjusted to match the performance of your machine.