Actions

VFDs

From PROBOTIX :: wiki

Revision as of 14:18, 18 January 2019 by Admin (Talk | contribs) (→‎Setting needed for galaxy series machines:: added leading zeros)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


Huangyang VFD

Huanyang VFD Wiring
Huanyang VFD Wiring Diagram

Huanyang VFD Manual

To change settings:

  1. Press [PROGRAM]
  2. Use arrow keys to change to program number your looking to change
  3. Press [SET]
  4. Use the arrow keys to change the value to appropriate value
  5. Press [SET] to save the value

Setting needed for galaxy series machines:

  • PD001 – Source of Run Command – 0
  • PD002 – Source of Operating Frequency – 1
  • PD014 - Acceleration - 3
  • PD070 – Analog Input 0-10V – 0
  • PD144 – Rated Motor Revolution – 3000

Displaying RPM instead of Hz:

Press the arrow over key until the Rott light is illuminated


Sunfar E300 VFD

Sunfar E300 VFD Wiring
Sunfar E300 VFD Wiring Diagram

Sunfar E300 VFD Manual

To change settings:

  1. Press [SET]
  2. Use arrow keys to change to program number your looking to change
  3. Press [SET]
  4. Use the arrow keys to change the value to appropriate value
  5. Press [SET] to save the value
  6. Press [ESC] to exit programming mode


Setting needed for galaxy series machines:

  • F0.00 = 1 (for 0-10V Control) or 3 (for knob control)
  • F0.02 = 1000 (for panel [RUN] button)
  • F0.04= 400 (Spindle Frequency)
  • F0.05 = 5.0 (Acceleration time)
  • F0.12 = 400 (Basic Frequency)
  • F0.13 = 220 (Volts)
  • F1.03 = 400 (Max Frequency)
  • F1.07=1
  • F1.08=2
  • F1.09=3

Sunfar E500 VFD

Sunfar E500 VFD Wiring
Sunfar E500 VFD Wiring Diagram

Sunfar E500 VFD Manual

To change settings:

  1. Press [SET]
  2. Use arrow keys to change to program number your looking to change
  3. Press [SET]
  4. Use the arrow keys to change the value to appropriate value
  5. Press [SET] to save the value
  6. Press [ESC] to exit programming mode


Setting needed for galaxy series machines:

  • F0.00 = 1 (for 0-10V Control) or 3 (for knob control)
  • F0.02 = 1001 (for panel [RUN] button)
  • F0.04= 400 (Spindle Frequency)
  • F0.05 = 5.0 (Acceleration time)
  • F0.11 = 0 (Torque Boost)
  • F0.12 = 400 (Basic Frequency)
  • F0.13 = 220 (Volts)
  • F1.00 = 0.4 (AI Lower Limit)
  • F1.01 = 10 (AI Upper Limit)
  • F1.03 = 0 (Min Freq)
  • F1.04 = 400 (Max Freq)
  • F1.08 = 11 (Terminal 1 Function)
Retrieved from "https://www.probotix.com/wiki/index.php?title=VFDs&oldid=14149"