Unity-M2
From PROBOTIX :: wiki
Example LinuxCNC config: File:Unity-M2.zip
Pin-out
We recommend using LinuxCNC's coolant mist and flood for controlling Relays 1 & 2. This would provide M7 and M8 commands and on-screen checkboxes for control.
- See here for more info: M7/M8/M9
|
1) 5VDC Relay 1 | 10) X Limit |
| 2) X Step | 11) Y1 Limit | |
| 3) X Dir | 12) Y2 Limit | |
| 4) Y1 Step | 13) Z Limit | |
| 5) Y1 Dir | 14) 120VAC Relay | |
| 6) Z Step | 15) E-stop | |
| 7) Z Dir | 16) 5VDC AUX | |
| 8) Y2 Step | 17) 5VDC Relay 2 | |
| 9) Y2 Dir | 18-25) GND |