Difference between revisions of "ArtCam Express"
From PROBOTIX :: wiki
Line 4: | Line 4: | ||
The zip file contains the ArtCAM post processor for use with LinuxCNC or PlanetCNC software. A post is provided for Inch and MM. After you unzip the file, the folder will contain two post processors for ArtCAM. You will place these in the PostP folder under ArtCAM2012. When you restart ArtCAM the added posts will be available as a machine language option. | The zip file contains the ArtCAM post processor for use with LinuxCNC or PlanetCNC software. A post is provided for Inch and MM. After you unzip the file, the folder will contain two post processors for ArtCAM. You will place these in the PostP folder under ArtCAM2012. When you restart ArtCAM the added posts will be available as a machine language option. | ||
− | [[file: | + | [[file:LinuxCNC_PostP.zip]] |
[[file:PlanetCNC_PostP.zip]] | [[file:PlanetCNC_PostP.zip]] |
Revision as of 11:48, 27 December 2013
Information:
Post Processors:
The zip file contains the ArtCAM post processor for use with LinuxCNC or PlanetCNC software. A post is provided for Inch and MM. After you unzip the file, the folder will contain two post processors for ArtCAM. You will place these in the PostP folder under ArtCAM2012. When you restart ArtCAM the added posts will be available as a machine language option.