Difference between revisions of "Legacy Machine LinuxCNC Configuration"
From PROBOTIX :: wiki
| Line 18: | Line 18: | ||
== V90 == | == V90 == | ||
| + | This file will need to be adjusted to match the performance of your machine. | ||
| + | |||
[[file:V90.zip]] | [[file:V90.zip]] | ||
== X90 == | == X90 == | ||
| + | This file will need to be adjusted to match the performance of your machine. | ||
| + | |||
[[file:X90.zip]] | [[file:X90.zip]] | ||
Revision as of 08:03, 27 September 2013
You will need to unzip the file onto your desktop of the machine computer. You will then go to "Places" => "Home Folder" => "LinuxCNC" => "Configs" Once you are in the configs folder you will place the folder contained in the zip file into the configs folder.
Then you will go to "Application" => "CNC" => "LinuxCNC" => then select the configuration you want to use. In the lower left of the configuration selection window, you have the option to create a desktop short cut. This is recommended for easy access to the program.
Comet
Meteor
V90
This file will need to be adjusted to match the performance of your machine.
X90
This file will need to be adjusted to match the performance of your machine.