Difference between revisions of "LinuxCNC 2.9.2 on Debian 12"
From PROBOTIX :: wiki
| Line 25: | Line 25: | ||
# When the installer has finished it will reboot in the Debian 12 operating system. | # When the installer has finished it will reboot in the Debian 12 operating system. | ||
| − | <gallery mode="packed-overlay"> | + | <gallery mode="packed-overlay" widths="200px"> |
File: installer1.jpg | Step 1: Start Installer | File: installer1.jpg | Step 1: Start Installer | ||
File: installer2.jpg | Step 2; Wait For Installer To Finish | File: installer2.jpg | Step 2; Wait For Installer To Finish | ||
| Line 43: | Line 43: | ||
| − | <gallery mode="packed-overlay"> | + | <gallery mode="packed-overlay" widths="200px"> |
File: installer4.jpg | Go to Places > Home Folder | File: installer4.jpg | Go to Places > Home Folder | ||
File: installer5.jpg | Double-click clone_linuxcnc.sh | File: installer5.jpg | Double-click clone_linuxcnc.sh | ||
| Line 58: | Line 58: | ||
# Wait for setup script to run. This will change some icons, set the desktop background, setup networking for the Mesa cards and several other things. | # Wait for setup script to run. This will change some icons, set the desktop background, setup networking for the Mesa cards and several other things. | ||
| − | <gallery mode="packed-overlay"> | + | <gallery mode="packed-overlay" widths="200px"> |
File: installer9.jpg | Open 'setup' folder | File: installer9.jpg | Open 'setup' folder | ||
File: installer10.jpg | Double-click os_setup.sh | File: installer10.jpg | Double-click os_setup.sh | ||
Revision as of 09:27, 20 June 2024
Note: Requires 64 Bit Processor.
Before starting you will need:
- 8GB (or larger) FAT32 formatted USB drive
- Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/PROBOTIX-LinuxCNC_2.9.2.iso
- Download Win32DiskImager: http://www.probotix.com/linuxcnc/win32diskimager-1.0.0-install.exe
Contents
Create the Bootable USB Drive
Burn Image To USB Thumb Drive
- step 1
- step 2
Install Operating System
Note: Make sure your BIOS clock is set properly before starting the re-install. It may also be a good idea to replace the BIOS battery before setting the clock.
Boot From USB Thumb Drive to Install Custom Debian 12
- Insert USB Thumb Drive and boot from it. You may need to select the boot source. This varies by motherboard, but can include hitting <F12> or <F2> or <F10> to select the USB boot media.
- The operating system install takes about 10 minutes.
- When the installer has finished it will reboot in the Debian 12 operating system.
Step 1: Start Installer
Step 2; Wait For Installer To Finish
Step 2; Reboots into Debian 12
Clone PROBOTIX Linux CNC Repository
Note: Make sure Linux is connected to the internet either by ethernet or by wifi dongle.
- Go to Place > Home Folder
- Double-click on clone_linuxcnc.sh
- Choose "Run in Terminal"
- Wait for LinuxCNC to be cloned locally
- A new folder 'linuxcnc' is created. Open that folder.
Go to Places > Home Folder
Double-click clone_linuxcnc.sh
Choose "Run in Terminal"
Wait for LinuxCNC to be cloned
Open 'linuxcnc' folder
Update OS
- Open the 'setup' folder
- Double-click os_setup.sh
- Choose "Run in Terminal" again
- Wait for setup script to run. This will change some icons, set the desktop background, setup networking for the Mesa cards and several other things.
Open 'setup' folder
Double-click os_setup.sh
Choose "Run in Terminal"
Wait for setup script to run
Update AXIS
- /home/probotix/linuxcnc/update_axis.sh
Edit Configuration
Edit ini File
- /home/probotix/linuxcnc/configs/PROBOTIX/[machine_model].ini
LinuxCNC First Launch
Launch Configuration Chooser
- Applications > Accessories > LinuxCNC
- Choose Machine Version