Difference between revisions of "LinuxCNC 2.9.2 on Debian 12"

Revision as of 09:04, 20 June 2024

Note: Requires 64 Bit Processor.

Before starting you will need:

8GB (or larger) FAT32 formatted USB drive
Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/PROBOTIX-LinuxCNC_2.9.2.iso
Download Win32DiskImager: http://www.probotix.com/linuxcnc/win32diskimager-1.0.0-install.exe

Create the Bootable USB Drive

Burn Image To USB Thumb Drive

step 1
step 2

Install Operating System

Note: Make sure your BIOS clock is set properly before starting the re-install. It may also be a good idea to replace the BIOS battery before setting the clock.

Boot From USB Thumb Drive to Install Custom Debian 12

Insert USB Thumb Drive and boot from it. You may need to select the boot source. This varies by motherboard, but can include hitting <F12> or <F2> or <F10> to select the USB boot media.

Step 1: Start Installer
Step 2; Wait For Installer To Finish

The operating system install takes about 10 minutes. When the installer has finished it will reboot in the Debian 12 operating system.

Clone PROBOTIX Linux CNC Repository

/home/probotix/clone_linuxcnc.sh

Go to Places > Home Folder
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9

Update OS

/home/probotix/linuxcnc/setup/os_setup.sh

Update AXIS

/home/probotix/linuxcnc/update_axis.sh

Edit Configuration

Edit ini File

/home/probotix/linuxcnc/configs/PROBOTIX/[machine_model].ini

LinuxCNC First Launch

Launch Configuration Chooser

Applications > Accessories > LinuxCNC
Choose Machine Version

@@ Line 40: / Line 40: @@
 <gallery mode="packed-overlay">
-File: Step1_agree.jpg | Step 1
+File: installer4.jpg | Go to Places > Home Folder
 File: Step2_choose_distro.jpg | Step 2
 File: Step3_choose_iso.jpg | Step 3