Difference between revisions of "LinuxCNC 2.9.2 on Debian 12"
From PROBOTIX :: wiki
(→Boot From USB Thumb Drive to Install Custom Debian 12) |
(→Boot From USB Thumb Drive to Install Custom Debian 12) |
||
| Line 25: | Line 25: | ||
</ol> | </ol> | ||
| + | |||
<div><gallery mode="packed-overlay"> | <div><gallery mode="packed-overlay"> | ||
File: installer1.jpg | Step 1: Start Installer | File: installer1.jpg | Step 1: Start Installer | ||
File: installer2.jpg | Step 2; Wait For Installer To Finish | File: installer2.jpg | Step 2; Wait For Installer To Finish | ||
</gallery></div> | </gallery></div> | ||
| − | |||
| − | <li value="2">When the installer has finished it will reboot in the Debian 12 operating system. | + | <ol> |
| − | + | <li value="2">The operating system instsall takes about 10 minutes. When the installer has finished it will reboot in the Debian 12 operating system.</li> | |
</ol> | </ol> | ||
<hr> | <hr> | ||
Revision as of 09:01, 20 June 2024
Note: Requires 64 Bit Processor.
Before starting you will need:
- 8GB (or larger) FAT32 formatted USB drive
- Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/PROBOTIX-LinuxCNC_2.9.2.iso
- Download Win32DiskImager: http://www.probotix.com/linuxcnc/win32diskimager-1.0.0-install.exe
Contents
Create the Bootable USB Drive
Burn Image To USB Thumb Drive
- step 1
- step 2
Install Operating System
Note: Make sure your BIOS clock is set properly before starting the re-install. It may also be a good idea to replace the BIOS battery before setting the clock.
Boot From USB Thumb Drive to Install Custom Debian 12
- Insert USB Thumb Drive and boot from it. You may need to select the boot source. This varies by motherboard, but can include hitting <F12> or <F2> or <F10> to select the USB boot media.
Step 1: Start Installer
Step 2; Wait For Installer To Finish
- The operating system instsall takes about 10 minutes. When the installer has finished it will reboot in the Debian 12 operating system.
Clone PROBOTIX Linux CNC Repository
- /home/probotix/clone_linuxcnc.sh
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Update OS
- /home/probotix/linuxcnc/setup/os_setup.sh
Update AXIS
- /home/probotix/linuxcnc/update_axis.sh
Edit Configuration
Edit ini File
- /home/probotix/linuxcnc/configs/PROBOTIX/[machine_model].ini
LinuxCNC First Launch
Launch Configuration Chooser
- Applications > Accessories > LinuxCNC
- Choose Machine Version