Difference between revisions of "LinuxCNC 2.9.2 on Debian 12"

Revision as of 11:12, 18 June 2024

Note: Requires 64 Bit Processor.

Before starting you will need:

8GB (or larger) FAT32 formatted USB drive
Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/PROBOTIX-LinuxCNC_2.9.2.iso
Download Win32DiskImager: http://www.probotix.com/linuxcnc/win32diskimager-1.0.0-install.exe

Create the Bootable USB Drive

Burn Image To USB Thumb Drive

step 1
step 2

Install Operating System

Note: Make sure your BIOS clock is set properly before starting the re-install. It may also be a good idea to replace the BIOS battery now as well.

Boot From USB Thumb Drive to Install Custom Debian 12

step 1
step 2

Clone PROBOTIX Linux CNC Repository

/home/probotix/clone_linuxcnc.sh

Update OS

/home/probotix/linuxcnc/setup/os_setup.sh

Update AXIS

/home/probotix/linuxcnc/update_axis.sh

Edit Configuration

Edit ini File

/home/probotix/linuxcnc/configs/PROBOTIX/[machine_model].ini

LinuxCNC First Launch

Launch Configuration Chooser

Applications > Accessories > LinuxCNC
Choose Machine Version

@@ Line 18: / Line 18: @@
 == Install Operating System ==
-{{WarningBox|'''Note:'''Make sure your BIOS clock is set properly before starting the re-install. It may also be a good idea to replace the BIOS battery now as well.}}
+{{WarningBox|'''Note: '''Make sure your BIOS clock is set properly before starting the re-install. It may also be a good idea to replace the BIOS battery now as well.}}
 === Boot From USB Thumb Drive to Install Custom Debian 12 ===