Actions

Difference between revisions of "LinuxCNC 2.9.2 on Debian 12"

From PROBOTIX :: wiki

(Created page with "Before starting you will need: * 8GB (or larger) FAT32 formatted USB drive * Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/PROBOTIX-LinuxCNC_2.9.2.is...")
(No difference)

Revision as of 14:52, 9 May 2024

Before starting you will need:


Create the Bootable USB Drive

Note: The following directions are to be done on an Internet connected Windows computer.

Using Win32DiskImager

  1. step 1
  2. step 2
Retrieved from "https://www.probotix.com/wiki/index.php?title=LinuxCNC_2.9.2_on_Debian_12&oldid=14507"