Difference between revisions of "LinuxCNC 2.6 on Ubuntu 10.04"
From PROBOTIX :: wiki
| Line 1: | Line 1: | ||
Before starting you will need: | Before starting you will need: | ||
* 8GB (or larger) FAT32 formatted USB drive | * 8GB (or larger) FAT32 formatted USB drive | ||
| − | * Download the LinuxCNC iso image file: PROBOTIX-LinuxCNC_2.9.2.iso | + | * Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/PROBOTIX-LinuxCNC_2.9.2.iso |
* Download Win32DiskImager: http://www.probotix.com/linuxcnc/win32diskimager-1.0.0-install.exe | * Download Win32DiskImager: http://www.probotix.com/linuxcnc/win32diskimager-1.0.0-install.exe | ||
Revision as of 13:50, 9 May 2024
Before starting you will need:
- 8GB (or larger) FAT32 formatted USB drive
- Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/PROBOTIX-LinuxCNC_2.9.2.iso
- Download Win32DiskImager: http://www.probotix.com/linuxcnc/win32diskimager-1.0.0-install.exe
Create the Bootable USB Drive
Note: The following directions are to be done on an Internet connected Windows computer.
Using Win32DiskImager
- step 1
- step 2