Difference between revisions of "Automatic Tool Length Sensor"
From PROBOTIX :: wiki
(Created page with "The new tool length sensor for the Comet/Asteroid/Meteor machines radically optimizes the tool change process. Your CAM post-processor will need to be modified such that the...") |
(No difference)
|
Revision as of 08:15, 5 September 2014
The new tool length sensor for the Comet/Asteroid/Meteor machines radically optimizes the tool change process.
Your CAM post-processor will need to be modified such that the tool change function, which typically looks like this:
M6 T1
The new tool change function will look like this:
o100 CALL [1]