Difference between revisions of "LinuxCNC 2.9.2 on Debian 12"

Revision as of 07:59, 20 June 2024

Note: Requires 64 Bit Processor.

Before starting you will need:

8GB (or larger) FAT32 formatted USB drive
Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/PROBOTIX-LinuxCNC_2.9.2.iso
Download Win32DiskImager: http://www.probotix.com/linuxcnc/win32diskimager-1.0.0-install.exe

Create the Bootable USB Drive

Burn Image To USB Thumb Drive

step 1
step 2

Install Operating System

Note: Make sure your BIOS clock is set properly before starting the re-install. It may also be a good idea to replace the BIOS battery before setting the clock.

Boot From USB Thumb Drive to Install Custom Debian 12

Insert USB Thumb Drive and boot from it. You may need to select the boot source. This varies by motherboard, but can include hitting <F12> or <F2> or <F10> to select boot media.

Step 1: Start Installer
Step 2; Wait For Installer To Finish

When the installer has finished it will reboot in the Debian 12 operating system.
test

Clone PROBOTIX Linux CNC Repository

/home/probotix/clone_linuxcnc.sh

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9

Update OS

/home/probotix/linuxcnc/setup/os_setup.sh

Update AXIS

/home/probotix/linuxcnc/update_axis.sh

Edit Configuration

Edit ini File

/home/probotix/linuxcnc/configs/PROBOTIX/[machine_model].ini

LinuxCNC First Launch

Launch Configuration Chooser

Applications > Accessories > LinuxCNC
Choose Machine Version

@@ Line 29: / Line 29: @@
      </gallery></div>
 <ol>
-<li value="42">When the installer has finished it will reboot in the Debian 12 operating system.</li>
+<li value="2">When the installer has finished it will reboot in the Debian 12 operating system.</li>
+<li>test</li>
 </ol>
 <hr>