Difference between revisions of "HT23-420-8"
From PROBOTIX :: wiki
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[Category:Stepper Motors]] | ||
==GREEN MONSTER 420 OZ/IN Stepper Motor== | ==GREEN MONSTER 420 OZ/IN Stepper Motor== | ||
* NEMA23 | * NEMA23 | ||
| Line 17: | Line 18: | ||
|- | |- | ||
|Holding Torque (N.m +-10%) | |Holding Torque (N.m +-10%) | ||
| − | | | + | |300 N.cm Min |
| − | | | + | |300 N.cm Min |
| − | | | + | |215 N.cm Min |
|- | |- | ||
|Rated Current (Amps/Phase) | |Rated Current (Amps/Phase) | ||
| − | | | + | |4.2 |
| − | | | + | |2.1 |
| − | | | + | |3.0 |
|- | |- | ||
|Resistance (ohm/phase +- 10%) | |Resistance (ohm/phase +- 10%) | ||
| − | | | + | |0.8 |
| − | | | + | |3.2 |
| − | | | + | |1.6 |
|- | |- | ||
|Inductance(mH/phase +-20%) | |Inductance(mH/phase +-20%) | ||
| − | | | + | |3.8 |
| − | | | + | |15.2 |
| − | | | + | |3.8 |
|- | |- | ||
|Rotor Inertia (g.cm 2) | |Rotor Inertia (g.cm 2) | ||
| − | | | + | |800 |
| − | | | + | |800 |
| − | | | + | |800 |
|- | |- | ||
|Motor Length | |Motor Length | ||
| − | | | + | |154mm/6" |
| − | | | + | |154mm/6" |
| − | | | + | |154mm/6" |
|- | |- | ||
|Motor Weight | |Motor Weight | ||
| Line 57: | Line 58: | ||
|- | |- | ||
|Shaft Size | |Shaft Size | ||
| − | |3/8" | + | |3/8" from 1/4" rear |
| − | |3/8" | + | |3/8" from 1/4" rear |
| − | |3/8" | + | |3/8" from 1/4" rear |
|} | |} | ||
| Line 70: | Line 71: | ||
=Dimensions= | =Dimensions= | ||
| − | [[File: | + | [[File:420dims.jpg]] |
=Dimensions 2= | =Dimensions 2= | ||
[[File:420dims2.jpg]] | [[File:420dims2.jpg]] | ||
Latest revision as of 21:03, 8 March 2018
Contents
GREEN MONSTER 420 OZ/IN Stepper Motor
- NEMA23
- 420 Oz/In Torque
- Hybrid Design
- 1.8 deg / 200 Steps Per Revolution
- 3/8" Shaft
NEMA 23 Green Monster 420 Oz/In Stepper Motor
| Description | Parallel | Series | UniPolar |
| Holding Torque (N.m +-10%) | 300 N.cm Min | 300 N.cm Min | 215 N.cm Min |
| Rated Current (Amps/Phase) | 4.2 | 2.1 | 3.0 |
| Resistance (ohm/phase +- 10%) | 0.8 | 3.2 | 1.6 |
| Inductance(mH/phase +-20%) | 3.8 | 15.2 | 3.8 |
| Rotor Inertia (g.cm 2) | 800 | 800 | 800 |
| Motor Length | 154mm/6" | 154mm/6" | 154mm/6" |
| Motor Weight | 1.8kg/4lbs | 1.8kg/4lbs | 1.8kg/4lbs |
| Number of Wires | 8 | 8 | 8 |
| Shaft Size | 3/8" from 1/4" rear | 3/8" from 1/4" rear | 3/8" from 1/4" rear |
Motor Phase Wiring
Torque Curve
Dimensions
Dimensions 2
