Difference between revisions of "LinuxCNC 2.9.2 on Debian 12"

Revision as of 07:38, 20 June 2024

Note: Requires 64 Bit Processor.

Before starting you will need:

8GB (or larger) FAT32 formatted USB drive
Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/PROBOTIX-LinuxCNC_2.9.2.iso
Download Win32DiskImager: http://www.probotix.com/linuxcnc/win32diskimager-1.0.0-install.exe

Create the Bootable USB Drive

Burn Image To USB Thumb Drive

step 1
step 2

Install Operating System

Note: Make sure your BIOS clock is set properly before starting the re-install. It may also be a good idea to replace the BIOS battery before setting the clock.

Boot From USB Thumb Drive to Install Custom Debian 12

Step 1: Start Installer
Step 2; Wait For Installer To Finish

Clone PROBOTIX Linux CNC Repository

/home/probotix/clone_linuxcnc.sh

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9

Update OS

/home/probotix/linuxcnc/setup/os_setup.sh

Update AXIS

/home/probotix/linuxcnc/update_axis.sh

Edit Configuration

Edit ini File

/home/probotix/linuxcnc/configs/PROBOTIX/[machine_model].ini

LinuxCNC First Launch

Launch Configuration Chooser

Applications > Accessories > LinuxCNC
Choose Machine Version

@@ Line 21: / Line 21: @@
 === Boot From USB Thumb Drive to Install Custom Debian 12 ===
-# step 1
+<gallery mode="packed-overlay">
-# step 2
+File: installer1.jpg | Step 1: Start Installer
+File: installer2.jpg | Step 2; Wait For Installer To Finish
+</gallery>
 === Clone PROBOTIX Linux CNC Repository ===
 # /home/probotix/clone_linuxcnc.sh
+<gallery mode="packed-overlay">
+File: Step1_agree.jpg | Step 1
+File: Step2_choose_distro.jpg | Step 2
+File: Step3_choose_iso.jpg | Step 3
+File: Step4_choose_drive.jpg | Step 4
+File: Step5_choose_format.jpg | Step 5
+File: Step6_choose_create.jpg | Step 6
+File: Step7_confirm.jpg | Step 7
+File: Step8_write.jpg | Step 8
+File: Step9_complete.jpg | Step 9
+</gallery>
 === Update OS ===