Difference between revisions of "Legacy Machine LinuxCNC Configuration"
From PROBOTIX :: wiki
(→Meteor) |
|||
| Line 23: | Line 23: | ||
[[file:Meteor_(metric).zip]] | [[file:Meteor_(metric).zip]] | ||
| − | [[file: | + | [[file:Meteor_4A_Metric.zip]] |
== V90 == | == V90 == | ||
Revision as of 15:59, 28 January 2015
You will need to unzip the file onto your desktop of the machine computer. You will then go to "Places" => "Home Folder" => "LinuxCNC" => "Configs" Once you are in the configs folder you will place the folder contained in the zip file into the configs folder.
Then you will go to "Application" => "CNC" => "LinuxCNC" => then select the configuration you want to use. In the lower left of the configuration selection window, you have the option to create a desktop short cut. This is recommended for easy access to the program.
- TS in the file name is only for machines with a Tool Sensor
- 4A in the file name is only for machines with a 4th/Rotary Axis
- Standard (imperial) units are default unless configuration specifies Metric
- 2015 in the file name are for machines built after 2015 OR machines retrofitted with Bipolar drivers and wiring
- If you do not know what configuration to use, contact PROBOTIX
Comet
Meteor
V90
This file will need to be adjusted to match the performance of your machine.
X90
This file will need to be adjusted to match the performance of your machine.