Revision as of 07:30, 13 September 2013

BeagleBone Black

Getting Started

BeagleBone Black Info

Bone 101

Working with Git

http://alistapart.com/article/get-started-with-git

http://git-scm.com/book/ch2-5.html

http://nvie.com/posts/a-successful-git-branching-model/

Working with Device Trees

http://learn.adafruit.com/introduction-to-the-beaglebone-black-device-tree/device-tree-overlays

https://docs.google.com/document/d/17P54kZkZO_-JtTjrFuVz-Cp_RMMg7GB_8W9JK9sLKfA/pub

http://blog.inbedded.net/blog/2013/06/02/beaglebone-black-and-lcd-equals-fun/

pins.txt

https://github.com/selsinork/beaglebone-black-pinmux/blob/master/pinmux.ods

Programmable Realtime Unit (PRU)

http://blog.boxysean.com/2012/08/12/first-steps-with-the-beaglebone-pru/

C++ Programming

http://circuitco.com/support/index.php?title=C/C%2B%2B_Programming

Machine Kit

https://github.com/cdsteinkuehler/MachineKit

http://bb-lcnc.blogspot.com/2013/07/adding-homelimit-switches.html

# P9.31 GPIO3_14
setp [PRUCONF](DRIVER).stepgen.00.steppin         0x8E

The value above is given meaning by the PRU code, which uses the
kernel numbering scheme, but offset by one so that 0x00 (the default
value for all HAL signals) means don't do anything.  The details are:

GPIO Pin Value:
value = 32 * ( <GPIO_bank> + 1 ) + bit

PRU Direct Output Bits:
value = 32 * (4 + 1 ) + bit = 160 + bit = 0xA0 + bit

So 0x8E = 142 = (32 * 4) + 14 = GPIO bank 3, bit 14

BeagleBone Black Dimensions

sudo -A su -c "echo BB-BLACK-LCNC-PBX-BB > /sys/devices/bone_capemgr.*/slots"

cat /sys/devices/bone_capemgr*/slots

sudo vim /boot/uboot/uEnv.txt

echo BB-BLACK-LCNC-PBX-BB >/sys/devices/bone_capemgr*/slots

watch --differences dmesg | tail

tail -f /var/log/messages