View source for LinuxCNC 2.9.2 on Debian 12

{{WarningBox|'''Note:''' Requires 64 Bit Processor.}}


Before starting you will need: 
* 8GB (or larger) FAT32 formatted USB drive
* Download the LinuxCNC iso image file: http://www.probotix.com/linuxcnc/PROBOTIX-LinuxCNC_2.9.2.iso
* Download Win32DiskImager: http://www.probotix.com/linuxcnc/win32diskimager-1.0.0-install.exe


== Create the Bootable USB Drive ==

=== Burn Image To USB Thumb Drive ===
# step 1
# step 2



== Install Operating System ==

{{WarningBox|'''Note: '''Make sure your BIOS clock is set properly before starting the re-install. It may also be a good idea to replace the BIOS battery before setting the clock.}}

=== Boot From USB Thumb Drive to Install Custom Debian 12 ===
# Insert USB Thumb Drive and boot from it. You may need to select the boot source. This varies by motherboard, but can include hitting <F12> or <F2> or <F10> to select boot media.
<gallery mode="packed-overlay">
File: installer1.jpg | Step 1: Start Installer
File: installer2.jpg | Step 2; Wait For Installer To Finish
</gallery>
# When the installer has finished it will reboot in the Debian 12 operating system.

=== Clone PROBOTIX Linux CNC Repository ===
# /home/probotix/clone_linuxcnc.sh

<gallery mode="packed-overlay">
File: Step1_agree.jpg | Step 1
File: Step2_choose_distro.jpg | Step 2
File: Step3_choose_iso.jpg | Step 3
File: Step4_choose_drive.jpg | Step 4
File: Step5_choose_format.jpg | Step 5
File: Step6_choose_create.jpg | Step 6
File: Step7_confirm.jpg | Step 7
File: Step8_write.jpg | Step 8
File: Step9_complete.jpg | Step 9
</gallery>

=== Update OS ===
# /home/probotix/linuxcnc/setup/os_setup.sh

=== Update AXIS ===
# /home/probotix/linuxcnc/update_axis.sh

== Edit Configuration ==

=== Edit ini File ===
#  /home/probotix/linuxcnc/configs/PROBOTIX/[machine_model].ini



== LinuxCNC First Launch ==
=== Launch Configuration Chooser ===
# Applications > Accessories > LinuxCNC
# Choose Machine Version